Tinseltown Gorgonian Coral

TSA Tinseltown Gorgonian Coral

Sale price  $49.99 Regular price $59.99
Skip to product information
Tinseltown Gorgonian Coral

TSA Tinseltown Gorgonian Coral

Sale price  $49.99 Regular price $59.99
SAVE $10

Grow your corals with:

5-Day Guarantee

Reef Guard Covered

Ships Overnight

FedEx Priority

Expert Support

We've got your back!

Care Level Easy
Lighting Low–Moderate
Flow Moderate, indirect
Placement Low–Mid
Temperament Semi-aggressive (rapid encruster; isolate or provide 3–6 inches clearance)
Feeding photosynthetic, phytoplankton, microplankton, rotifers, oyster eggs, copepod nauplii, powdered coral foods, marine snow
TSA Tinseltown Gorgonian Coral FAQ's

Why did my bright metallic green centers fade to dull green or brown?

This coral’s color shifts with spectrum and nutrient balance. Excess white light and high phosphate can deepen zooxanthellae, muting fluorescence. Increase blue/UV channels, keep NO3 ~5–15 ppm and PO4 ~0.03–0.1 ppm, and avoid rapid swings in alkalinity. Strong, randomized flow helps keep the mat clean so tissue reflects light better. Expect gradual recovery over 1–3 weeks.

How do I prevent Pachyclavularia violacea from overrunning my aquascape?

Mount it on an isolated “island” rock surrounded by sand. Trim the purple mat weekly at the edge with a razor and siphon fragments. If it creeps where you don’t want it, gently peel the mat; spot-treat any leftovers with a tiny dab of kalk paste. Avoid placing it on main rockwork or touching glass/overflows.

My colony has been closed for days—what should I check beyond basics?

Inspect for algae/cyano film on the mat; blast with a baster and increase flow. Look for vermetid snail threads or detritus lodged at the base—both irritate polyps. Verify stable alkalinity (7.5–9.5 dKH) and recent dips that may delay opening. If newly added, reduce intensity 20–30% and ramp up over 1–2 weeks. Most reopen once irritation is removed.

Is it aggressive, and how does it handle neighbors?

It rarely uses stings; its threat is smothering by overgrowth. It can crawl over zoanthids, mushrooms, and even up glass. Conversely, many LPS and some euphyllids can burn it, leaving bare patches that algae colonize. Provide space, prune routinely, and run fresh carbon if mixing with soft corals to reduce chemical stress.
Description
Photo is of mother colony. Frags are typically ¾" – 1" in size.

The TSA Tinseltown Gorgonian is an aquacultured branching octocoral with slender upright rods, warm tissue, and bright polyp texture under reef lighting. Its tall, narrow growth form brings vertical rhythm to open rockwork and moves differently from fleshy LPS or encrusting soft corals. The name identifies a TSA Signature cultivar, not a confirmed species, so this guide avoids assigning a genus that the product record does not establish.

Tinseltown Gorgonian quick care facts

Identification TSA trade-name Gorgonian; exact species not stated
Coral type Branching soft coral / octocoral
Care level Beginner-tagged; easy to moderate with stable conditions
Lighting Low to moderate with gradual acclimation
Water flow Moderate, indirect and alternating
Placement Lower to middle reef rock with vertical clearance
Temperament Peaceful; protect from stinging neighbors and abrasion
Feeding Fine plankton or powdered coral food once or twice weekly
Frag size Typically ¾–1 inch
Photo Mother colony; each cut-to-order frag varies

Color and growth form

The mother colony shows thin cylindrical branches with copper, rose, and lavender tones beneath blue light. Small polyps create the glittering “tinsel” effect along each branch. Color can look warmer under balanced white channels, and healed frag tips may initially differ from mature branches before extension and tissue coverage settle.

Placement and acclimation

Secure the frag upright and provide vertical space for growth. Begin in lower-to-middle rockwork, away from aggressive LPS and from leather corals that can touch it. Leave enough room for the branches to sway without scraping. Temperature-acclimate first, then reduce handling and allow several stable days before increasing light or changing its final location.

How to tune light and flow

Use low-to-moderate initial light and a broad current that changes direction. Flow should carry suspended particles past the polyps and prevent a dusty coating without forcing the branches sideways. Observe the entire light cycle: continuous closure near a pump suggests excessive force, while film and settled debris point to a sheltered dead spot.

Feeding Tinseltown Gorgonian

Feed a restrained cloud of Pigment Power Live Red Phytoplankton or PolypLab Reef-Roids once or twice per week. Fine particles should move across the open polyps instead of dropping onto the plug. Supplemental feeding is prudent because the exact species-level nutritional strategy is not stated. Keep portions small enough that the aquarium clears promptly.

Routine care and water stability

Stable salinity and alkalinity matter more than frequent adjustments. Keep the frag securely mounted, inspect the rear branches, and baste away loose sediment during water changes. Watch nutrient trends when adding coral food. A calibrated refractometer, regular alkalinity testing, and consistent top-off practices make acclimation and long-term polyp extension more predictable.

Troubleshooting

If the tips remain closed, look for direct pump pressure, contact with another coral, or fresh glue touching living tissue. If a temporary smooth film appears, improve broad flow and baste gently. Color darkening can follow reduced light or elevated nutrients; sudden paling can follow excessive intensity or instability. Make one correction at a time and observe.

How this TSA Gorgonian compares

TSA Snow Flurry Gorgonian forms a finer, more open network, while TSA Whirlwind Gorgonian has a fuller fuzzy appearance and thicker branches. Tinseltown is the linear choice: slim vertical rods with a sparkling surface that fits narrow gaps in the aquascape.

Frag size, shipping, and what you receive

The image is the mother colony, not the exact frag. Cut-to-order pieces are typically ¾–1 inch and vary in branch number, shape, and coloration. Temperature-acclimate the sealed bag, inspect and dip only with a product labeled for coral use, rinse, then mount with living tissue clear of adhesive. Initial polyp closure after transit is expected.

Pairs well with

Pigment Power Live Red Phytoplankton and PolypLab Reef-Roids for fine feeding, Reef Breeders RP-25 Wavemaker for controllable movement, PolypLab Reef Primer Shot for arrival protocol, and Reef Genetics Reef Glue for mounting.

Price Match Guarantee We match verified competitor prices.
Looking for something specific? Tell us what you need.
SKU: CTOXTinseltownGorgonian

Related items

Inverts ship FREE with Corals

View all

Clean Up Crew Invertebrate Pack – Algae Control

Clean Up Crew Invertebrate Pack – Algae Control

$34.99

Clean Up Crew Invertebrate Pack – Sand Cleaners

Clean Up Crew Invertebrate Pack – Sand Cleaners

$44.99

Clean Up Crew Invertebrate Pack – Full Arsenal

Clean Up Crew Invertebrate Pack – Full Arsenal

Sale price  $79.99 Regular price $85.83

Nassarius Snail

Nassarius Snail

$3.99

Skunk Cleaner Shrimp

Skunk Cleaner Shrimp

$42.49

Tiger Sand Conch

Tiger Sand Conch

$14.99

Astrea Snail

Astrea Snail

$2.49

Emerald Crab

Emerald Crab

$7.99

These items ship FREE with Corals

View all

Green Seaweed - Premium Nori - Reef Genetics

Green Seaweed - Premium Nori - Reef Genetics

$8.99

Reef Glue - Reef Genetics

Reef Glue - Reef Genetics

$2.99

Chemi-Pure Blue - Boyd Enterprises

Chemi-Pure Blue - Boyd Enterprises

$2.95

Chemi-Pure Elite - Boyd Enterprises

Chemi-Pure Elite - Boyd Enterprises

$10.89

Reefer Madness UV Reactive T-Shirt

Reefer Madness UV Reactive T-Shirt

$34.99

TSA Mini Logo Hat

TSA Mini Logo Hat

$34.99

Zesty Bites (Sour Candy) - Zesty Snacks

Zesty Bites (Sour Candy) - Zesty Snacks

$6.99

Command Bus Cable - Hydros

Command Bus Cable - Hydros

$7.50