Turbelle NanoStream 6040 - Tunze

Tunze Turbelle® nanostream® 6045

For aquariums from 20 to 500 liters (5.3 to 132 USgal.).
Flow rate: approx. 200 to 4,500 l/h (53 to 1,190 USgal./h) with Turbelle® Controller 7020
Energy consumption: 1.5 – 13 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m (118”)
Dimensions without flow deflector and Magnet Holder: 60 x 43 x 68 mm (2.36 x 1.69 x 2.68 in.)
Outlet: ø40 mm (1.57”)
Silence Magnet Holder up to a glass thickness of 15 mm (2/3”).

TUNZE® HUB EDITION

The TUNZE® HUB EDITION pumps can be controlled electronically and have been provided with a fish-care function. These pumps are equipped with the Turbelle® Controller 7020 to adjust the pump performance and for access to the TUNZE® HUB. Using this cloud solution, many devices from TUNZE® and other manufacturers can be clearly controlled and regulated via WiFi and the Internet. An integrated real-time clock prevents time shifts due to power failure.

nanostream® design

Turbelle® nanostream® electronic are speed-controlled pumps with a Turbelle® controller operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to >1,000 liters (10 to >265 USgal.) for simulation of lapping waves or tidal currents. They contain a microprocessor-controlled motor and a Turbelle® controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill.
Apart from that, the pumps can also connect to devices controlled by the SmartController via the TUNZE® HUB.

Safety extra-low voltage, blocking and...

run-dry protection.