Syncra ADV 9.0 Water Pump - Sicce

Syncra ADV 9.0 Water Pump - Sicce

$299.99
Skip to product information
Syncra ADV 9.0 Water Pump - Sicce

Syncra ADV 9.0 Water Pump - Sicce

UPC: 8011469967034

$299.99
90 Day Returns Reef Guard Covered Free Ground Shipping Cart qualifies with this item Expert Support We've got your back!

Goes well with:

Description
The Syncra ADV 9.0 is an AC-powered water pump from Sicce rated for up to 2,500 GPH and 15 feet of head pressure. It is suitable for use as a return pump, closed-loop circulation pump, or reactor feed pump in freshwater and saltwater systems. The volute rotates a full 360 degrees, allowing the outlet to be oriented in any direction to suit tight or unconventional sump layouts. Oversized rubber feet on all sides isolate vibration from adjacent surfaces, and a ceramic impeller shaft and bearings reduce both noise and energy draw. The pump arrives with a comprehensive fitting kit covering 3/4" and 1" barb and PVC connections, making it compatible with most common tubing and plumbing configurations.

The Sicce Syncra ADV 9.0 is a submersible or inline AC pump designed to replace or upgrade the return line on aquariums that demand reliable, efficient flow. With a maximum output of 2,500 GPH and a 15-foot head rating, it is appropriately sized for mid-to-large display systems, and its near-unity power factor means that 90 watts at the wall translates to usable hydraulic work rather than wasted heat — a meaningful difference in long-term operating cost compared with older motor designs in this flow class.

The defining mechanical upgrade in the ADV line is the fully rotatable volute. The outlet can be positioned at any angle through a full 360-degree range without disassembling the pump body, which matters when fitting a pump into a sump compartment where the plumbing entry point is fixed. The ceramic impeller shaft and ceramic bearings contribute to smoother, quieter operation than the traditional Syncra series and extend service life by resisting corrosion and wear in both fresh and salt water.

Vibration management received particular attention in the ADV redesign. The oversized rubber feet are positioned on all exterior faces of the pump housing rather than only the bottom, so the unit can be oriented vertically, horizontally, or stood upright against a sump wall without creating contact noise against glass or acrylic. This makes the pump genuinely practical in compact sump sections where clearances are tight.

The Syncra ADV 9.0 ships with a complete fitting kit that covers 3/4" and 1" barb fittings as well as threaded PVC adapters in both sizes, so the pump can be plumbed with soft tubing or hard-pipe PVC without sourcing additional transition fittings. The 10-foot power cord provides reach in most equipment cabinets. Sicce backs the ADV line with a five-year warranty.

Price Match Guarantee We match verified competitor prices.
Looking for something specific? Tell us what you need.

Overview

Efficient. Quiet. Adaptable.

The Syncra ADV 9.0 combines a high-efficiency AC motor with practical installation features that make it a straightforward choice for return pump and circulation duties.

  • 360° Volute Rotation

    • Outlet repositions to any angle without disassembling the pump
    • Accommodates fixed plumbing entry points in tight sump compartments
    • Compatible with return, closed-loop, and reactor configurations
  • Ceramic Shaft & Bearings

    • Ceramic impeller shaft resists corrosion in salt water
    • Smoother operation and reduced noise versus the standard Syncra line
    • Contributes to the near-unity power factor and lower energy draw
  • All-Side Vibration Isolation

    • Oversized rubber feet cover all exterior faces of the pump body
    • Prevents contact noise when mounted against glass or acrylic walls
    • Allows vertical, horizontal, or sidewall placement without rattle

Inside the Syncra ADV 9.0 Water Pump - Sicce

Syncra ADV 9.0 Pump Body
Syncra ADV 9.0 Pump Body

AC-powered submersible or inline pump, 2,500 GPH max flow

  • Max flow: 2,500 GPH
  • Max head: 15 ft
  • Power draw: 90W at 120VAC
  • Dimensions: 7.0" L x 3.8" W x 5.70" H
  • 10 ft power cable
  • 360° rotatable volute; ceramic impeller shaft and bearings
Fitting Kit
Fitting Kit

Comprehensive barb and PVC adapter set for 3/4" and 1" plumbing

  • 2x 3/4" PVC adapters
  • 2x 1" PVC adapters
  • 2x 3/4"–1" barbed adapters
  • 2x collet fittings
  • 4x O-rings
  • 4x rubber feet (all-side vibration isolation)

What's Included

  • Syncra ADV 9.0 Pump Body

    Syncra ADV 9.0 Pump Body

    AC-powered submersible or inline pump, 2,500 GPH max flow

  • Fitting Kit

    Fitting Kit

    Comprehensive barb and PVC adapter set for 3/4" and 1" plumbing

Specifications

SYNCRA ADV 9.0 PUMP

Max Flow
2,500 GPH
Max Head
15 ft
Wattage
90W
Voltage
120VAC
Dimensions
7.0" L x 3.8" W x 5.70" H
Cable Length
10 ft
Inlet
3/4" or 1" barb or PVC
Outlet
3/4" or 1" barb or PVC
Warranty
5 years

Related items