WaveEngine 0-10V Quad Cable - Hydros

Not every controllable pump on the market accepts the WaveEngine's direct drive connection, but many of those same pumps do expose a 0-10V variable speed input. The WaveEngine 0-10V Quad Cable bridges that gap, adding four independent 0-10V output channels so the WaveEngine can orchestrate pumps it would otherwise be unable to reach. The result is a genuinely unified flow system rather than a patchwork of separate controllers each running on its own schedule.

Compatibility is deliberately wide. The 0-10V input pathway covers pumps from Reef Octopus (VarioS and Octo Pulse lines), Abyzz (A100 through A1200 and AFC 400), IceCap Gyre 2K and 4K, CoralBox QP-9+ and 16+, Jebao WP/RP/PP/FS/SW series, Tunze Turbelle Nanostreams, Waveline DC 6000 and 10000II, and others. If you run a mixed-brand system — a VorTech at one end of the tank and a Reef Octopus Octo Pulse at the other, for instance — all pumps can run simultaneously, opposite each other, or in entirely different patterns without complicated per-pump coding.

Beyond compatibility, the cable inherits the full WaveEngine feature set for each connected pump: native flow modes and presets without intricate programming, reverse pump drive for pumps like the Octo Pulse 4 that change flow character in reverse, cross-engine synchronization when multiple WaveEngines are in use, and real-time power and RPM monitoring with text or email alerts if a pump is blocked, disconnected, or degrading. Cloud and local app control (iOS and Android) remain fully available. An optional battery backup module (sold separately) can shift connected pumps into low-power circulation patterns automatically during an outage.

On the practical side, four pump outputs running off a single power supply means the power bricks, individual controllers, and external wireless modules that typically accumulate around a multi-pump system can largely be eliminated. Installation is straightforward: remove the existing power supplies and per-pump controllers, connect the WaveEngine via this cable, and configure from the app. If your setup includes pumps that appear in the 0-10V input column of the Hydros compatibility chart, this cable is the correct purchase to bring them under WaveEngine control.