HYDROS Kraken Drive Port (12V) Power Cable - Hydros
HYDROS Kraken Drive Port (12V) Power Cable - Hydros
Goes well with:
The HYDROS Kraken Drive Port (12V) Power Cable gives HYDROS controller users a direct, controller-managed power connection for low-draw 12V accessories. Rather than relying on a separate power supply, the cable draws from an available Drive port on the controller itself, keeping installation clean and allowing the HYDROS ecosystem to manage power delivery to connected devices.
At 72 inches long, the cable accommodates most cabinet and sump configurations without requiring extensions. The GX12-2 connector seats securely into the Drive port, while the 5.5mm x 2.1mm female barrel connector on the opposite end fits a wide range of common 12V accessories including ATO pumps, solenoid valves, steering valves, small fans, and cabinet LED strips.
Compatible controllers include the Kraken, X2, X4, XD, and other HYDROS Control units that feature an available Drive port. Before ordering, confirm your controller has an open Drive port and that your target device operates on 12V — this cable is not rated for 24V devices and should not be used in those applications.
Overview
Power. Connect. Control.
A straightforward cable solution for integrating 12V accessories directly into your HYDROS controller's Drive port ecosystem.
Broad Device Compatibility
- Powers ATO pumps, fans, solenoids, and steering valves
- Works with cabinet LED lighting strips
- Fits any 12V device with a 5.5mm x 2.1mm barrel input
Controller Integration
- Connects to any available Drive port on supported HYDROS controllers
- Compatible with Kraken, X2, X4, XD, and other HYDROS Control units
- Keeps accessory power managed within the HYDROS ecosystem
Practical Build
- 72-inch length suits most sump and cabinet installations
- GX12-2 connector on the Drive port end
- Standard 5.5mm x 2.1mm female barrel connector on the device end
Inside the HYDROS Kraken Drive Port (12V) Power Cable - Hydros
HYDROS Kraken Drive Port (12V) Power Cable
72-inch cable connecting HYDROS Drive ports to 12V accessories
- 72 inches (approx. 6 feet) in total length
- GX12-2 connector on the controller end
- 5.5mm x 2.1mm female barrel connector on the device end
- Rated for 12V devices only — not suitable for 24V applications
- Compatible with Kraken, X2, X4, XD, and other HYDROS Control units with an available Drive port
What's Included
-
HYDROS Kraken Drive Port (12V) Power Cable
72-inch cable connecting HYDROS Drive ports to 12V accessories
Specifications
HYDROS KRAKEN DRIVE PORT (12V) POWER CABLE
- Cable Length
- 72 inches
- Controller-End Connector
- GX12-2
- Device-End Connector
- 5.5mm x 2.1mm female barrel
- Voltage Rating
- 12V DC only
- Compatible Controllers
- Kraken, X2, X4, XD, and other HYDROS Control units with Drive port