Supplies ships FREE over $49

5 Day Guarantee & 90 Day Returns

Split-Pay with Paypal, Affirm, & Shop
1 2

Heater Controller - IceCap

IceCap  |  SKU: IC-ACH1000W  |  Barcode: 6974415981121
$5999

Tags:  

The IceCap Heater Controller allows precise temperature regulation for your aquarium by connecting up to two heating elements (sold separately). With dual-heating power jacks and support for up to 1000 watts, this controller ensures a stable aquatic environment. For added safety, it can be integrated with an external aquarium system controller.

Features:

  • Dual Grounded Output Heater Control – Supports up to two heating elements.
  • High Capacity – Accommodates a combined total of 1000 watts.
  • Accurate Heat Control – Maintains precise temperature regulation.
  • Freshwater & Marine Compatible – Designed for all aquarium types.
  • 1-Year Limited Warranty – Ensures product reliability.

Specifications:

Specification Details
Temperature Control Modes On/Off Control, Heating
Temperature Control Range 20-34°C / 68-93°F
Temperature Resolution 0.1°C / 32°F
Temperature Accuracy ±1°C / ±1°F
Ambient Temperature <35°C / 95°F
Audible Alarm Over Temperature Alarm
Input Power 100 ~240VAC/60Hz
Relay Contact Capacity Heating (10A, 100-240VAC)
Controller Dimensions 3.125in x 5.375in x 1.125in
Probe Cord Length 5ft
Heater Outlet Cord Length 18in
Calibration Offset ±5.0° (C/F) in 0.5° increments

Controller Requirement

Heater Controller Only – Requires a Proper-Sized Heater(s) to Operate.

Indoor Use Only.

LED Indicators:

  • Blue <POWER> LED – Indicates power is ON.
  • Red <ON/OFF> LED – Indicates heater power is ON.

Button Functions:

  • Power/Set Button: Hold <SET> for 5 seconds to turn the controller ON/OFF. Press once to enter target temperature setting mode.
  • C/F Button: Press to switch between Celsius and Fahrenheit.
  • Plus (+) Button: Increases the target temperature. Press <SET> to save.
  • Minus (-) Button: Decreases the target temperature. Press <SET> to save.

Controller Temperature Calibration:

  1. Compare the aquarium's water temperature on a separate thermometer with the Heater Controller display.
  2. If there is a large discrepancy, press and hold <+> and <-> simultaneously for 3 seconds until the water temperature display blinks.
  3. Adjust up or down in ±5.0° (C/F) increments using the <+> or <-> buttons.
  4. Press <SET> to confirm the calibration setting.
  5. The bottom display will revert to showing the water temperature.

Order your IceCap Heater Controller today and ensure your aquarium maintains a stable water temperature!

Add Merch to your box ships FREE

View all