Neptune Systems – Apex Practical Multi-Purpose Utility Pmup V2
he PMUP v2 is a multi-purpose pump that can be used for many different tasks on your aquarium. The redesigned PMUP now includes valuable features over the previous version, allowing it to be maintained with the removable screen but the PMUP will also now automatically shut off when it detects that it is running dry, but also over temperature protection.
- Auto Top Off
- Carbon Reactors
- GFO Reactors
- BioPellet Reactors
- Ideal for Salt or Freshwater
ATO will likely be the most popular use for this pump. And unlike many wimpy pumps out there, the PMUP has enough pressure to push water up 14 feet vertically, it can even move the water up from one floor below.
This means you could put your RO water storage in your basement or downstairs in a utility room and it could still pump it up to the tank.
It also has a vertically oriented design with a bottom intake and top output that is perfect for use in jugs or other RO containers. Just drop it in!
Run your reactors safely and with less energy
The PMUP is not just for ATO. It is also a great pump to use for running your various reactors bio-pellets, carbon, GFO, or even the two-stage combo unit from BRS you see here. The PMUP uses less than 20W of power so it is a very efficient way to run reactors and adds very little heat to your aquarium. We’re certain there will be many other uses found for the PMUP we’ve not even considered yet.
Removable Screen makes for easy cleaning and maintenance
Many inexpensive ATO pumps are not designed to be maintained. It’s almost as if they were meant to be disposable. But the PMUP has an easy to remove screen that keeps out foreign objects and also makes it easy to clean and maintain the pump
Easy to connect with standard tubing and fittings
The PMUP Has a smooth, 3/8″ (9.5mm) output that will easily connect to silicon tubing or standard push-fit connectors.
Dimensions – 4.58″ H x 2.24″ Diameter
Max Flow – 100 GPH
Max Head – 14′
Power Consumptions – 17w
1x PMUP v2 Multi-purpose Utility Pump
Note – Requires Apex (any model and a 1Link module or EnergyBar832 with available DC24V Accessory Port. If you do not have an Apex Controller, check out the PMUP with Power Supply.