Behind the Scenes · Top Shelf Aquatics

It's Time For A Change.

1.2K views4 minute watch

What you’ll learn

About This Video

Jon, an aquaculture specialist at Top Shelf Aquatics, demonstrates how to do a saltwater aquarium water change on a new farm system. The farm staff tests water daily to monitor elements, and each week the team selects systems for water changes based on nutrient and element levels. For a smooth process, Jon prepares two lines: one for draining and one for filling.

Jon turns off the system and pump manually because the new system has not yet been connected to the Apex. He clamps a siphoning tube into the tank, starts the siphon, and drains the water to the desired level. While the tank drains, he uses a refractometer to confirm that the freshly mixed salt water in the salt vat is around 1.026 salinity. He then secures the fill line and pumps new salt water into the system. Top Shelf Aquatics typically changes 25% to 30% depending on nutrient levels; this system receives a 25% water change. Once filled, Jon restarts the system and pumps.

takeaways”:[

Read the full video transcript

[Music] hey guys it's john from tsa today we're going to do a water change on one of our new systems every single day we have a member of the farm staff testing the water making sure all the elements are in tip-top shape every week we do choose a few systems that we see a decrease in nutrients and elements and we like to replenish it with a good old water change so follow me and i'll go get my equipment [Music] [Applause] [Music] [Applause] [Music] so to make this process nice and smooth i like to have two lines one is the drain line and the other is the fill line we start off by turning off the system turning off the pump and then connecting one end of the drain line into the tank as it's going down to the desired level i attach the fill line on the other end and turn on our salt vat which pushes freshly mixed salt water into the new tank usually we're able to turn off the systems from our phone however since this is a brand new system we still haven't set it up to the apex so i'm just gonna manually turn them off with these [Applause] [Music] controllers [Music] so the next step is adding this siphoning tube into the tank clamping it down and starting the siphon [Music] [Applause] [Music] [Applause] [Music] so while the tank's draining i'm going to double check that the salt and the salt that is at the right salinity we like to keep it around 1.026 so i'll use my tool the refractometer and just double check before i start filling the tank back up [Music] [Applause] [Music] [Applause] [Music] [Applause] now that the tank is drained i'm just going to insert the fill line clamp it down and start pumping in new salt water just because this is a new system does not mean we have to do a larger water change it's honestly a preference we like to do 25 30 water change depending on how high or how low the nutrients are with this one we're just going to do a easy 25 water change [Music] [Applause] [Music] now that the tank is filled up i just turned back on the systems turn on the pumps and that finishes it out for the day now we just wait for next week and start all over oh before i forget if you guys enjoyed this video hit that like button and subscribe and follow us on instagram tick tock and facebook now i gotta get back to work i'll see you guys later take my refract to 2.2 no all right the correct amount of while this water is [Music] dry [Applause] [Music]