Description

Smart. Safe. Quiet.

The ReefATO+ is designed to maintain a stable salinity and water volume in a reef aquarium by automatically replenishing the water lost due to evaporation. In addition, the ReefATO+ provides two other critical aquarium health indicators: a fully featured on-line digital temperature monitor and a leak detector.

The ReefATO+ Consists of:

ReefBeat Connected ATO+ Controller

3m/10” Silicone Tubing

Syphon Breaker

Tube Holder

Sensor Holder & Magnetic Corner Bracket

ATO Level & Temperature Sensor

12v DC Pump

Leak Detector for RODI & Aquarium Water

ATO Sensor

Slim-line, multi-input, titanium probe, solid-state (EC technology) water level sensor, with a built in digital thermometer accurate to 0.1 degree.

ATO Pump

Quiet, variable flow, serviceable ATO pump (6–10w), diameter 4.5cm / 1.8”, max flow 300 lph / 75 gph, max head 2.5m / 8’.

Leak Detector

Highly sensitive, REEF-SPEC, titanium probe leak detector for RO and seawater, triggers notifications to App with optional audible alarm.

Smart Controller

The micro-processor monitors and reliably controls all of the components and connects them to the ReefBeat eco-system.

Complete Installation Kit

• Sensor holder and magnetic corner mounting bracket for 12mm ½” glass.
  • 3M /10′ – 1.5mm / 1/16″ thick silicone tubing ID 5mm / 0.2″.
  • Silent flow – Tube holder, clips on 4 – 12mm / ½” glass.
  • Siphon Breaker.

Safe.

l-proof (solid-state EC technology) water level sensor with built-in safety shutoff.Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water or if a leak is detected.

3-in-1 ReefATO + Auto Top Off System ATO

Features of the ReefATO+ auto top-off system:

Highly accurate temperature monitor

External leak detector

Smart controller with ReefBeat features

Unique solid-state level sensor with five titanium probes

Backup OFF sensors

Fail-safe mechanism to stop the pump if it operates for too long

ReefBeat notifications for any issues

 

How it works:

EC technology titanium probes detect water levels and trigger the pump to maintain a stable water level and salinity

Full array of titanium probes provides an indication of the actual water level relative to the sensor, visible in the ReefBeat App

Temperature sensor integrated in the ATO+ sensor is pre-calibrated for accuracy and provides temperature logs and notifications via the ReefBeat App

 

Safe, powerful, and quiet ATO pump:

Quiet, variable flow, 12 vdc ATO pump

Max flow rate 300 lph / 75 gph, max head 2.5m / 8′, power 6-10W

Pump performance monitor in the controller shuts down the pump automatically if it is not connected, stalls, or the RO reservoir runs dry

Pump speed is automatically adjusted to maintain a flow rate of approximately 72 lph / 18 gph

Noise damping rubber impellor chamber cover and impellor can be removed for maintenance

 

Leak detector:

Highly sensitive, Reef-Spec leak detector with saltwater resistant titanium probes

Disables ATO Auto-fill and sounds an alarm and sends a notification if a leak is detected

Can be connected to the Emergency Quick-action for the aquarium to automatically shut down other ReefBeat devices

 

Complete installation kit includes:

Sensor holder and magnetic corner mounting bracket

3M /10′ – 1.5mm / 1/16″ thick silicone tubing ID 5mm / 0.2″

Silent flow – Tube holder, clips on 4 – 12mm / ½” glass

Siphon breaker

Safety features:

Solid-state EC technology water level sensor with built-in safety shutoff

Automatic shut-down if the sensor is not connected, if the pump runs significantly longer than normal, if the RO reservoir runs out of water, or if a leak is detected